Displays current software license level, port speed licensing, and feature packs enabled on your switches.
| all | Specifies all slots on a stack. |
| slot | Specifies one or more slots on a stack. |
N/A.
The command displays information on the software license level and feature packs enabled on the switch or nodes on a stack, including the trial license and days left to expiry.
To see the license information on a SummitStack node, run the command while logged into that node.
Note
See the specific chapter of the ExtremeXOS 30.6 User Guide that discusses each feature to determine if a license is required for some functionality. If not noted, all functionality is available, and license is not required.The following command displays the license level configuration:
show licenses
On a SummitStack, the output from this command looks similar to the following:
Slot-3 Stack.12 > show licenses Enabled License Level: Advanced Edge Enabled Feature Packs: None Effective License Level:Edge
The show output also includes the current status of the non-Extreme optical device license:
# show license
Enabled License Level:
Advanced Core
Enabled Feature Packs:
MPLS ServiceProviderEdge 3rdPartyOptics
For ExtremeSwitching X870-96x-8c switches, port speed license information appears:
# show license
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
DirectAttach
Enabled Port Speed:
4 ports (81, 85, ..., 93) can be partitioned to 1x100G, 2x50G, 1x40G, 4x25G, or 4x10G.
To see all license levels on a stack:
Slot-1 Stack.6 # show licenses slot all
Slot Enabled License Effective License Feature Packs
---- ------------------------ ------------------------ ------------------------
1 Advanced Edge Advanced Edge DirectAttach
2 Advanced Edge Advanced Edge ServiceProviderEdge
DirectAttach
NetworkTiming
This command was first available in ExtremeXOS 11.1.
The information on enabled feature packs was added in ExtremeXOS 11.4.
The information on the trial licenses was added in ExtremeXOS 11.6.
The show output was updated to include the current status of the non-Extreme optical device license in ExtremeXOS 15.4.
ExtremeSwitching X870-96x-8c switch port speed license information was added in ExtremeXOS 22.2
The options all and slot were added in ExtremeXOS 22.5.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.