show iparp security

show iparp security [ {vlan} vlan_name | vlan vlan_list]

Description

Displays the IP ARP security violation information for one or all VLANs.

Syntax Description

vlan_name Specifies a single VLAN for which to display security violation information.
vlan_list Specifies a VLAN list of IDs to display security violation information.

Default

Shows security violation information for all VLANs except Mgmt.

Usage Guidelines

None.

Example

The following example displays IP ARP security violation information for all VLANs:

Switch.4 # show iparp security
Most Recent Violation
==========================================
Vlan               Security   Violations  Type   IP address        MAC          Port
======================================================================================
Default            ----
test               ----
Security Setting: (G) Gratuitous ARP Protection
Violation Type  : (g) Gratuitous ARP Violation

The following example displays IP ARP security violation information for VLAN Default:

Switch.5 # show iparp security "Default"
Most Recent Violation
==========================================
Vlan               Security   Violations  Type   IP address        MAC          Port
======================================================================================
Default            ----
Security Setting: (G) Gratuitous ARP Protection
Violation Type  : (g) Gratuitous ARP Violation

History

This command was first available in ExtremeXOS 10.1.

The vr option was added in ExtremeXOS 11.0.

The vlan_list variable was added in ExtremeXOS 16.1.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.