install firmware lrm-macsec-adapter

install firmware {{force} {slot slot_number} | lrm-macsec-adapter ports [port_list | all]}

Description

Installs new port (PHY) firmware for LRM/MACsec adapter ports.

Syntax Description

force Forces installation.
slot Designates installing the firmware on a slot.
slot_number Sets the slot number to install the firmware on.
lrm-macsec-adapter Designates installing LRM/MACsec adapter firmware.
ports Designates installing the firmware on particular ports.
port_list Sets which ports to install on.
all Indicates installing onto all applicable ports.

Default

N/A.

Usage Guidelines

If the LRM/MACsec adapter port firmware is out-of-date, a message similar to the following appears in the log:
<Warn:HAL.Port.Warning> LRM/MACsec Adapter port firmware on port 2:16 is out of date, do 'install firmware lrm-macsec-adapter' to update.

Installing LRM/MACsec adapter port firmware may take several minutes per adapter and interrupts traffic on the affected ports. Loss of power during this process might render the ports unusable.

Example

The following example installs new firmware for the LRM/MACsec adapter on port 2:16:

# install firmware lrm-macsec-adapter ports 2:16
Installing LRM/MACsec Adapter port firmware may take several minutes
per adapter and will interrupt traffic on the affected ports.
Loss of power during this process may render the ports unusable.
Do you want to continue?
(y - yes, n - no, <cr> - cancel) Yes
....................................................................................................................
LRM/MACsec Adapter port firmware has been updated successfully.

History

This command was first available in ExtremeXOS 30.6.

Platform Availability

This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X670-G2, X590, X620, X690, X695 series switches.