configure elrp-client disable ports

configure elrp-client disable-ports [exclude | include] [ ports | eaps-ring-ports | remote-endpoints vxlan | inter-vlan-loop]

Description

Creates an ELRP exclude port list.

Syntax Description

exclude Specifies that selected ports are to be excluded from ELRP disabling.
include Specifies that selected ports are to be included in ELRP disabling.
ports Specifies one or more ports to be excluded or included.
eaps-ring-ports Specifies whether EAPS ring ports are to be excluded or included.
remote-endpoints Specifies remote endpoints, if any, that are part of this VLAN.
vxlan Specifies VXLAN remote endpoints that are part of this VLAN.
inter-vlan-loop Excludes inter-VLAN loop detected ports.

Default

All ports, together with EAPS ring ports and VXLAN remote endpoints, are included by default; that is, they are disabled if a loop is detected on that port.

Usage Guidelines

Use this command to specify ports, EAPS ring ports, or VXLAN remote endpoints that are to be part of an ELRP exclude port list. Use the exclude option to add ports to the exclude port list. Use the include option to remove them from the list.

When ELRP detects a loop and has been configured to automatically disable the port where a looped ELRP PDU is received and an exclude port list has been configured, it will check to determine if that port is on the exclude port list. If that port is on the list, ELRP will not disable it; if it is not on the list, it will be disabled.

To display the ports that are include in the exclude port list, use the show elrp disabled-ports command.

To remove the exclude port list, use the unconfigure elrp-client disable ports command.

Example

The following example adds port 2:1 to an ELRP exclude port list:

configure elrp-client disable-ports exclude 2:1,2:3

History

This command was first available in ExtremeXOS 12.5.3.

VXLAN remote endpoint option added in ExtremeXOS 22.4.

The inter-vlan-loop option for excluding inter-VLAN loop detected ports was added in ExtremeXOS 30.1.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.