show elrp dynamic-vlans

show elrp dynamic-vlans {vm-tracking |netlogin |mvrp |all}

Description

This command shows ELRP configuration information for all, or specific types of, dynamic VLANs.

Syntax Description

dynamic-vlans ELRP configuration options for dynamically created VLANs.
mvrp Shows ELRP information for dynamic VLANs created by Multiple VLAN Registration Protocol (MVRP) only.
netlogin Shows ELRP information for dynamic VLANs created by Network Login only.
vm-tracking Shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only.
all (Default) Shows ELRP information for all dynamic VLANs.

Default

If you do not specify the type of dynamic VLAN, information about all types appear.

Example

The following example shows ELRP information for all types of dynamic VLANs:

# show elrp dynamic-vlans
 
VM-Tracking :
ELRP on client ports : Enabled
ELRP on uplink ports : Disabled
Transmit interval    : 1 second(s)
Loop detect action   : log and trap
Port disable on loop : Yes
Disabled port        : Ingress
Disabled duration    : 30 seconds
 
Netlogin :
ELRP on client ports : Enabled
ELRP on uplink ports : Disabled
Transmit interval    : 2 second(s)
Loop detect action   : log
Port disable on loop : No
 
MVRP                 : Enabled
Transmit interval    : 3 second(s)
Loop detect action   : trap
Port disable on loop : Yes
Disabled port        : Egress
Disabled duration    : Permanent

The following example shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only:

# show elrp dynamic-vlans vm-tracking 
VM-Tracking: 
ELRP for dynamic VLANs        : Enabled 
ELRP on client ports          : Enabled 
ELRP on uplink ports          : Enabled

History

This command was first available in ExtremeXOS 22.2.

Loop detection action information was added in ExtremeXOS 22.3.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.