configure sharing health-check member-port tcp-tracking

configure sharing health-check member-port port [disable | enable] tcp-tracking

Description

Enables or disables configured monitoring on a member port of a health check LAG.

Syntax Description

port

Specifies the member port.

Default

N/A.

Usage Guidelines

This disables/enables monitoring on a particular member port. When monitoring is disabled, the member port is added back to the LAG if it has not already been added. This allows a member port to be added back to LAG even though connectivity to the host is down.

Example

The following command disables port 12:

configure sharing health-check member-port 12 disable tcp-tracking

History

This command was first available in ExtremeXOS 12.1.3.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.