show l2pt profile

show l2pt profile profile_name

Description

Displays the contents of an L2PT profile.

Syntax Description

profile Displays profile that defines L2PT configuration for L2 protocols.
profile_name Displays only the specified profile.

Default

Disabled.

Usage Guidelines

Use this command to display the contents of an L2PT profile.

Example

The following is an example of the command's output:

# show l2pt profile 
Profile Name                   Protocol Filter Name              Action  CoS
-----------------------------  --------------------------------  ------  ---
my_l2pt_access_prof            my_list                           tunnel    1                                 
                               my_other_list                     tunnel    7
my_l2pt_network_prof           mylist                            encap                                  
                               my_other_list                     encap                                 
                               my_none­_list                     none 

# show l2pt profile my_l2pt_access_prof 
Profile Name                   Protocol Filter Name              Action  CoS
-----------------------------  --------------------------------  ------  ---
my_l2pt_access_prof            my_list                           tunnel    1                                 
                               my_other_list                     tunnel    7

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.