clear license-info

clear license-info [{software} | port-speed]

Description

This command, which should be used only in conjunction with a representative from Extreme Networks, clears the licensing information from the switch.

Syntax Description

software

Specifies ExtremeXOS base software license.

port-speed Clears all port speed licenses (for ExtremeSwitching X870-96x-8c switches only).

Default

N/A.

Usage Guidelines

Note

Note

Use this command only under the guidance of an Extreme Networks representative.

When you issue the command, the following message is displayed:

This will clear the license information stored in EEPROM and also delete the license file (license.xlic). Are you sure you want to continue? (y/N)

When you reply “yes”, the license information is removed from the EEPROM and the switch deletes the license.xlic file permanently.

Using the port-speed license keyword removes all port speed licensing. Port speed licenses increase the rate from 10G to 100G on QSFP28+ ports 1 through 24 on ExtremeSwitching X870-96x-8c switches.

Example

The following command removes licensing information from the switch:

clear license-info

The following command removes port speed licensing from an ExtremeSwitching X870-96x-8c switch:

# clear license-info port-speed
Are you sure you want to clear port speed license information stored in EEPROM? (y/N)  
Yes

History

This command was first available in ExtremeXOS 11.4.

The port-speed keyword was added in ExtremeXOS 22.2

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.