clear network-clock ptp counters

clear network-clock ptp [boundary | ordinary] vlan [vlan_name {ipv4_address [unicast-master | unicast-slave]} | all] counters

Description

This command clears the accumulated PTP packet counters. The clear can be performed on the following groups:

Per unicast-master or unicast-slave peer on a clock port.

Peers on a clock port.

Peers on all clock ports.

Note

Note

This command is available only for Boundary and Ordinary clocks.

Syntax Description

network-clock External Clock for Ethernet synchronization.
ptp Precise Time Protoco.l
boundary Boundary clock.
ordinary Ordinary clock.
vlan VLAN.
ipv4_address Peer IP address.
unicast-master IP addresses that are masters to the local clock.
unicast-slave IP addresses that are slaves to the local clock.
all All VLAN.
counters PTP message counts.

Default

N/A.

Usage Guidelines

Use this command to clear the accumulated PTP packet counters.

Example

N/A.

History

This command was first available in ExtremeXOS 15.2.

Platform Availability

This command is only available on boundary and ordinary clocks on ExtremeSwitching X460-G2, X670-G2 series switches.

Note

Note

PTP commands can be used only with the Network Timing feature pack.