Displays the specified access list counters.
| countername | Specifies the ACL counter to display. |
| port_list | Specifies to display the counters on these ports. |
| vlan_name | Specifies to display the counters on the VLAN. |
| ingress | Specifies to display ingress counters. |
| egress | Specifies to display egress counters. |
The default direction is ingress.
Use this command to display the ACL counters.
The following example displays all the counters for all ACLs:
show access-list counter
This command was first available in ExtremeXOS 10.1.
The egress option was first available in ExtremeXOS 11.3.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.