configure netlogin ports no-restart

configure netlogin ports [all | port_list] no-restart

Description

Disables the network login port restart feature.

Syntax Description

all Specifies all network login ports.
port_list Specifies one or more network login ports.

Default

The default setting is no-restart; the network login port restart feature is disabled.

Usage Guidelines

Use this command to disable the network login port restart feature on a network login port.

Configure network login port restart on ports with directly attached supplicants. If you use a hub to connect multiple supplicants, only the last unauthenticated supplicant causes the port to restart.

Enabling ONEPolicy removes the action of this command. This command is supported only in non-policy mode

Displaying the Port Restart Configuration

To display the network login settings on the port, including the configuration for port restart, use the following command:

show netlogin port port_list

Output from this command includes the enable/disable state for network login port restart.

Example

The following command disables network login port restart on port 1:1:

configure netlogin ports 1:1 no-restart

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.