Shows the current state of whether SNMP traps are set to occur when switch configurations are changed/saved.
N/A
The following example shows whether SNMP traps are set to occur when switch configurations are changed/saved:
# show snmp traps configuration SNMP Traps for configuration change : Disabled SNMP Traps for configuration save : Enabled
This command was first available in ExtremeXOS 22.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches..