open vm console

open vm vm_name {console}

Description

Opens a session to the serial console of a virtual machine (VM).

Syntax Description

vm Designates a virtual machine.
vm_name Specifies the VM name to use with a serial console.
console Open VM serial console (default).

Default

By default, a serial console is opened.

Usage Guidelines

The VM must be internally configured to enable the serial console.

You can disconnect the console session by typing CTRL + Y, or, if using Telnet recursively with an appropriate client, by typing CTRL + ] followed by “send escape”. A maximum of one session can be active for a VM.

You cannot access the serial console before starting a VM. You must start the VM, and then reboot it to gain serial console access.

The Extreme Insight feature requires the Solid State Storage Device SSD-120.

Example

The following example opens a serial console session with VM "vm1":

# open vm vm1 console

History

This command was first available in ExtremeXOS 30.3.

Platform Availability

This command is available on all platforms that support the Extreme Insight for Guest VMs feature and have a Core license installed. For a list of platforms that support the Insight feature and for information about licenses, see the ExtremeXOS 30.6 Feature License Requirements .