Configure a Hotspot

IQ Engine v10.7.5 or later is required.

Note

AP3000, AP5010, and AP5050 models support Hotspot 2.0.

Hotspot 2.0, also called Wi-Fi Certified Passport, is a standard for public access Wi-Fi that provides seamless and secure roaming among Wi-Fi networks and between Wi-Fi and cellular networks.

This task is part of the network policy configuration workflow. Use this task to configure a hotspot for an Enterprise SSID.

On the 2 Wireless page for the policy, select an existing Enterprise SSID, or select to add a new one.
From the Hotspot list, select Enabled.
From the Hotspot Profile list, select an existing profile, or select to add a new one.
On the Hotspot Identification tab, configure the settings to identify the hotspot.

For more information, see Hotspot Identification.
On the SP Identification tab, select an existing Service Provider Profile from the list, or select and configure the settings.

For more information, see Service Provider Identification.
On the Network Characteristics tab, configure the settings.

For more information, see Network Characteristics.
On the Online Signup tab, configure the settings.

For more information, see Online Signup.
Select SAVE.