In a Real Time Map, select a device to display device summary information and a list of
available actions.
AP Device Summary
The Summary tab displays the following information for a selected AP device:
Connected status — Offering
the number of Days, Hours, Minutes, and Seconds a device has been
connected.
AP Name
Model, and OS
Version
Network Policy associated
with the device
SSIDs — Network SSIDs
associated with the device
AP Installation Height: Select the icon to change the AP installation height. The measurement unit is the unit selected when the map was created or imported.
Elevation and Azimuth: Select the icon to adjust the elevation and azimuth settings to reflect that the device is mounted on a wall.
Radio Band details:
Power
Channel
Frequency
Number of Clients
Mode
Installation Photos — Upload photos or videos of the device installation.
For better performance, limit the image file (.png, .jpg) to less than 500
KB and limit the video file (.mp4, .mov.) to less than 5MB.
Switch Device Summary
The Summary tab displays the following information for a selected switch device:
Connected status — Offering
the number of Days, Hours, Minutes, and Seconds a device has been
connected.
Hostname/SysName — Select to view device details.
Model
Network Policy associated
with the device
IP Address, System MAC Address, OS Version, and Make of the device
Installation Photos — Upload photos or videos of the device installation.
For better performance, limit the image file (.png, .jpg) to less than 500
KB and limit the video file (.mp4, .mov.) to less than 5MB.
Actions
From the Actions tab, you can perform the following actions on a
selected device:
icon to change the AP installation height. The measurement unit is the unit selected when the map was created or imported.