Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

reconnect-interval

Configures the interval, in seconds, between successive attempts to re-establish a failed tunnel connection

Supported in the following platforms:

  • Access Points — AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

reconnect-interval <1-3600>

Parameters

reconnect-interval <1-3600>

reconnect-interval <1-3600>
Configures the interval between successive attempts to re-establish a failed tunnel connection
  • <1-3600> – Specify a value from 1 - 3600 seconds (default is 120 seconds).

Examples

nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#reconnect-interval 100
nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#
l2tpv3 policy L2TPV3Policy1
 hello-interval 200
 cookie-size 8
 reconnect-interval 100
 reconnect-attempts 8
nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#

Related Commands

no

Resets the interval between successive attempts to re-establish a failed tunnel connection to default (120 seconds)
Published April 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page