boot

Displays a device‘s boot configuration. Use this command to view the primary and secondary image details, such as Build Date, Install Date, and Version. This command also displays the current boot and next boot information.

Supported in the following platforms:

• Access Points — AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

show boot {on <DEVICE-NAME>}

Parameters

show boot {on <DEVICE-NAME>}

Examples

ap8432-070235#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       08/21/2018 04:28:34     08/23/2018 02:42:15     5.9.3.0-006D
  Secondary     08/15/2018 17:19:54     08/20/2018 02:58:40     5.9.3.0-005D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Primary
Software Fallback  : Enabled
ap8432-070235#

NOC-NX9500#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       08/21/2018 12:02:07     08/23/2018 08:15:10     5.9.3.0-006D
  Secondary     08/03/2018 02:52:46     08/07/2018 07:24:47     5.9.3.0-004D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Primary
Software Fallback  : Enabled
VM support         : Not present
NOC-NX9500#