Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

server

Configures the external NSight server's IP address or hostname
Note

Note

Starting with WiNG 5.9.4 you will not be able to configure NSight server on an VX 9000, NX 95XX, or NX 96XX platform. Extreme NSight is a separate target that can only be deployed on an external VM appliance.
Note

Note

For more information on Extreme NSight™, please refer to the Extreme NSight™ User Guide, available at https://extremenetworks.com/documentation.

Supported in the following platforms:

  • Service Platforms — NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

server host [<IP>|<HOSTNAME>|<X:X::X:X>] {http|https}

Parameters

server host [<IP>|<HOSTNAME>|<X:X::X:X>] {http|https}
server host [<IP>| <HOSTNAME>| <X:X::X:X>] Configures the NSight server's IP address or hostname. Use one of the following options to identify the NSight server:
  • <IP> – Configures the NSight server‘s IPv4 address
  • <HOSTNAME> – Configures the NSight server‘s hostname
  • <X:X::X:X> – Configures the NSight server‘s IPv6 address
Note: When this NSight policy is applied to an RF Domain, the RF Domain manager posts statistics (polled from devices within the RF Domain) to the external Extreme NSight server host specified here.
{http|https} Optional. Configures the protocol used to communicate with the NSight server
  • http – Optional. Uses HTTP to communicate
  • https – Optional. Uses HTTPS to communicate (this is the default setting)

Examples

nx9510-6C8A5C(config-nsight-policy-test2)#server host 172.22.0.153 http
nx9510-6C8A5C(config-nsight-policy-test2)#show context
nsight-policy test2
 server host 172.22.0.153 http 
nx9510-6C8A5C(config-nsight-policy-test2)#

Related Commands

no (nsight-policy-config-commands) Removes NSight server's IP address or hostname configuration from this NSight policy
Published April 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page