broadcast-dhcp
Configures broadcast DHCP packet handling
parameters
Supported in the following platforms:
- Access Points —
AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662,
AP8163, AP8543, AP8533.
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
broadcast-dhcp validate-offer
Parameters
broadcast-dhcp validate-offer
| validate-offer |
Enables validation of the broadcast DHCP packet destination (a wireless
client associated to the radio) before forwarding over the air. This option
is disabled by default. |
Examples
nx9500-6C8809(config-wlan-test)#broadcast-dhcp validate-offer
nx9500-6C8809(config-wlan-test)#show context
wlan test
ssid test
bridging-mode local
encryption-type none
authentication-type eap
accounting syslog host 172.16.10.4 port 2
acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
nx9500-6C8809(config-wlan-test)#
Related Commands
| no (wlan-config-mode) |
Disables validation of the broadcast DHCP packet destination (a wireless
client associated to the radio) before forwarding over the air |
|
Print
this page
Email this topic
Feedback
View PDF
Download EPUB