t5-security

Configures T5 PowerBroadband security settings. A T5 controller uses the IPX operating system to manage its connected radio devices, as opposed to the WiNG operating system used by RFS wireless controllers and NX service platforms. However, a T5 controller, once enabled as a supported external device, can provide data to WiNG to assist in a T5‘s management within the WiNG supported subnet populated by both types of devices. The CPEs are the T5 controller managed radio devices using the IPX operating system. These CPEs use a DSL as their high speed Internet access mechanism using the CPE‘s physical wallplate connection and phone jack.

Supported in the following platforms:

• Service Platforms — NX 5500, NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

t5-security [static-wep|wpa-enterprise|wpa-personal]

t5-security static-wep encryption-type [wep128|wep64] [hex <STRING>|passphrase <STRING>]

t5-security [wpa-enterprise|wpa-personal] encryption-type [ccmp|tkip|tkip-ccmp] 
version [mixed|wpa|wpa2]

Parameters

t5-security static-wep encryption-type [wep128|wep64] [hex <STRING>|passphrase <STRING>]

t5-security static-wep Configures the T5 WLAN security type as static-wep encryption-type [wep128|wep64] Applies one of the following encryption algorithms to the T5 support WLAN configuration: WEP64 or WEP128 hex <STRING> Configures the hex password (used to derive the security key) <STRING> – Specify the hex password (should not exceed the 10 - 26 characters). passphrase <STRING> Configures the passphrase shared by both transmitting and receiving authenticators <STRING> – Specify the passphrase. It could either be an alphanumeric string of 8 to 63 ASCII characters or 64 HEX characters. The alphanumeric string allows character spaces. This string is converted to a numeric value. Configuring a passphrase saves you the need to create a 256-bit key each time keys are generated.

t5-security [wpa-enterprise|wpa-personal] encryption-type [ccmp|tkip|tkip-ccmp] 
version [mixed|wpa|wpa2]

t5-security [wpa-enterprise| wpa-personal] Configures the T5 WLAN security type as: wpa-enterprise OR wpa-personal encryption-type [ccmp|tkip|tkip-ccmp] The following parameters are common to the wpa-enterprise and wpa-personal keywords: [ccmp|tkip|tkip-ccmp] – Applies one of the following encryption algorithms to the T5 support WLAN configuration: CCMP, TKIP, or TKIP-CCMP. version [mixed|wpa|wpa2] The following parameters are common to the wpa-enterprise and wpa-personal keywords: version – Applies one of the following encryption schemes to the vT5 support WLAN configuration: WPA, WPA2, or mixed.

Examples

nx9500-6C8809(config-wlan-test)#t5-security wpa-enterprise encryption-type ccmp version wpa

nx9500-6C8809(config-wlan-test)#show context
wlan test
 ssid test
 bridging-mode local
 encryption-type none
 authentication-type none
 t5-security wpa-enterprise encryption-type ccmp version wpa
 t5-client-isolation
nx9500-6C8809(config-wlan-test)#

Related Commands

no (wlan-config-mode) Removes the configured T5 PowerBroadband security settings