vlan-pool-member
Adds a member VLAN to a WLAN‘s VLAN pool. Use this option to
define the VLANs available to this WLAN. Additionally, define the number of wireless
clients supported by each VLAN.
Note
Configuration of a VLAN pool
overrides the 'vlan' configuration.
Supported in the following platforms:
- Access Points —
AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662,
AP8163, AP8543, AP8533.
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
vlan-pool-member <WORD> {limit <0-8192>}
Parameters
vlan-pool-member <WORD> {limit <0-8192>}
| vlan-pool-member |
Adds a member VLAN to a WLAN's VLAN pool Since users belonging to
separate VLANs can share the same WLAN, it is not necessary to create a
new WLAN for every VLAN in the network.
|
| <WORD> |
Define the VLANs available to this WLAN. It is either a single index, or
a list of VLAN IDs (for example, 1,3,7), or a range (for example,
1-10) |
| limit <0-8192> |
Optional. Is ignored if the number of clients are limited and well
within the limits of the DHCP pool on the VLAN
- <0-8192> –
Specifies the number of users allowed
|
Examples
nx9500-6C8809(config-wlan-test)#vlan-pool-member 1-10 limit 1
nx9500-6C8809(config-wlan-test)#show context
wlan test
ssid testWLAN1
vlan-pool-member 1 limit 1
vlan-pool-member 2 limit 1
vlan-pool-member 3 limit 1
vlan-pool-member 4 limit 1
vlan-pool-member 5 limit 1
vlan-pool-member 6 limit 1
vlan-pool-member 7 limit 1
vlan-pool-member 8 limit 1
vlan-pool-member 9 limit 1
vlan-pool-member 10 limit 1
bridging-mode local
encryption-type none
authentication-type none
protected-mgmt-frames mandatory
radius vlan-assignment
time-based-access days weekdays start 10:00 end 16:30
--More--
nx9500-6C8809(config-wlan-test)#
Print
this page
Email this topic
Feedback
View PDF
Download EPUB