EX3524 & EX3548 Profile/Device Config Commands

Profiles

Creates a new EX3524 and EX3548 profile and enters its configuration mode.

To navigate to this instance, use the following commands:

<DEVICE>(config)#profile ex35xx <EX35XX-PROFILE-NAME>

Where ex35xx can be a EX3524 or a EX3548 device type.

<DEVICE>(config-profile-<EX35XX-PROFILE-NAME>)#?
EX35XX Profile Mode commands:
  interface  Select an interface to configure
  ip         Internet Protocol (IP)
  no         Negate a command or set its defaults
  power      EX3500 Power over Ethernet Command
  upgrade    Configures upgrade option for ex3500 system
  use        Set setting to use

  clrscr     Clears the display screen
  commit     Commit all changes made in this session
  do         Run commands from Exec mode
  end        End current mode and change to EXEC mode
  exit       End current mode and down to previous mode
  help       Description of the interactive help system
  revert     Revert changes
  service    Service Commands
  show       Show running system information
  write      Write running configuration to memory or terminal

<DEVICE>(config-profile-<EX35XX-PROFILE-NAME>)#

The following table summarizes EX3524 and EX3548 profile/device configuration mode commands: