t5

T5 Profile Config Commands

Configures this T5 controller‘s country of operation

Supported in the following platforms:

  • Wireless Controllers — RFS4000
  • Service Platforms — NX9500, NX9510

Syntax

t5 country-code <WORD>

Parameters

t5 country-code <WORD>
country-code <WORD> Configures the 2 letter ISO-3166 country code for this T5 controller

Example

nx9500-6C8809(config-profile-T5TestProfile)#t5 country-code us

nx9500-6C8809(config-profile-T5TestProfile)#show context
profile t5 T5TestProfile
 no autoinstall configuration
 no autoinstall firmware
 interface vlan1
 interface vlan4090
 interface fe 5 2
..........................................................................
 interface fe 9 1
 use firewall-policy default
 service pm sys-restart
 t5 country-code US
 cpe address vlan 200 192.168.13.26 192.168.13.30
nx9500-6C8809(config-profile-T5TestProfile)#