Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

service (meshpoint-config)

Use this command to allow only those neighbors who are capable of 802.11n data rates to associate with this meshpoint.

Supported in the following platforms:

  • Access Points — AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

service [allow-ht-only|show cli]

Parameters

service [allow-ht-only|show cli]

service allow-ht-only

Allows only those neighbors who are capable of high throughput data rates (802.11n data rates) to associate with the meshpoint

service show cli

Displays running system configuration

Examples

nx9500-6C8809(config-meshpoint-test)#service allow-ht-only
nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 description "This is an example of a meshpoint description"
 meshid TestingMeshPoint
 shutdown
 beacon-format mesh-point
 control-vlan 1
 allowed-vlans 1,10-16,18-23
 neighbor inactivity-timeout 300
 data-rates 2.4GHz bgn
 data-rates 5GHz an
 security-mode psk
 wpa2 psk 0 Test Company
 wpa2 key-rotation unicast 1200
 wpa2 key-rotation broadcast 600
 root
 service allow-ht-only
nx9500-6C8809(config-meshpoint-test)#

Related Commands

no (meshpoint-config)

Removes the restriction that only 802.11n capable neighbor devices can associate with this meshpoint
service (common commands)

Invokes service commands to troubleshoot or debug
Published April 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page