ex3500-std-access-list
An EX3500 standard
ACL is a policy-based ACL that contains a set of filter criteria and
action that is applied to traffic originating from a specified
source.
The following table summarizes IPv4 EX3500 standard ACL
configuration commands:
|
EX3500-Standard-Access-List-Config Commands
| Command |
Description |
| deny (ex3500-std acl) |
Creates a deny rule that rejects packets from a specified
source or sources. The source can be a single device or a
range of devices within a specified network. Use this command
to also edit an existing deny rule. |
| permit (ex3500-std acl) |
Creates a permit rule that allows packets from a
specified source or sources. The source can be a single device
or a range of devices within a specified network. Use this
command to also edit an existing permit rule. |
| no (ex3500-std acl) |
Removes a deny and/or a permit access rule from this IPv4
EX3500 extended ACL |
|
Note
To
implement the EX3500 standard ACL, apply it directly to a EX3500 device,
or to an EX3500 profile. For more information, see
access-group.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB