device-upgrade

<MAC/HOSTNAME>

Upgrades firmware on the device identified by the <MAC/HOSTNAME> keyword

• <MAC/HOSTNAME> – Specify the device's MAC address or hostname.

no-reboot

Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

reboot-time <TIME>

Optional. Schedules an automatic reboot after a successful upgrade

• <TIME> – Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

upgrade-time <TIME> {no-reboot| reboot-time <TIME>}

Optional. Schedules an automatic device firmware upgrade and specifies the time at which the device is to be upgraded

• <TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. The following actions can be performed after a scheduled upgrade:

  • no-reboot – Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

  • reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

• <TIME> – Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

• <TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. The following actions can be performed after a scheduled upgrade:

  • no-reboot – Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

  • reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

staggered-reboot

This keyword is recursive and common to all of the above.

• Optional. Enables staggered reboot (one at a time), without network impact

After selecting the device type, schedule an automatic upgrade and/or an automatic reboot.

no-reboot

Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

reboot-time <TIME>

Optional. Schedules an automatic reboot after a successful upgrade

• <TIME> – Optional. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

upgrade-time <TIME> {no-reboot| reboot-time <TIME>}

Optional. Schedules an automatic firmware upgrade on all devices, of the specified type, on a specified day and time

• <TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. The following actions can be performed after a scheduled upgrade:

  • no-reboot – Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)

  • reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.

staggered-reboot

This keyword is recursive and common to all of the above.

• Optional. Enables staggered reboot (one at a time), without network impact

• Cancels upgrade on specific device(s). The devices are identified by their MAC addresses or hostnames.
• Cancels upgrade on all devices within the network
• Cancels upgrade on all devices of a specific type. Specify the device type.
• Cancels upgrade on specific device(s) or all device(s) within a specific RF Domain or all RF Domains. Specify the RF Domain name.

• <MAC/HOSTNAME> – Cancels a scheduled upgrade on the device identified by the <MAC/HOSTNAME> keyword. Specify the device‘s MAC address or hostname.
• all – Cancels scheduled upgrade on all devices

• <RF-DOMAIN-NAME> – Cancels scheduled device upgrade on all devices in a specified RF Domain. Specify the RF Domain name.
• all – Cancels scheduled device upgrade on all devices across all RF Domains

load-image <DEVICE-TYPE>

• <DEVICE-TYPE> - Specify the device type. The options are: AP510, AP505, NX5500, NX7500, NX9500, NX9600, VX9000.

After specifying the device type, provide the location of the required device firmware image.

<IMAGE-URL>

IPv4 URLs:

• tftp://<hostname|IP>[:port]/path/file

• ftp://<user>:<passwd>@<hostname|IP>[:port]/path/file

• sftp://<user>:<passwd>@<hostname|IP>[:port]>/path/file

• http://<hostname|IP>[:port]/path/file

• cf:/path/file

• usb<n>:/path/file

IPv6 URLs:

• tftp://<hostname|IPv6>[:port]/path/file

• ftp://<user>:<passwd>@<hostname|IPv6>[:port]/path/file

• sftp://<user>:<passwd>@<hostname|IPv6>[:port]>/path/file

• http://<hostname|IPv6>[:port]/path/file

• <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

• <RF-DOMAIN-NAME> – Upgrades devices in the RF Domain identified by the <RF-DOMAIN-NAME> keyword.
  • <RF-DOMAIN-NAME> – Specify the RF Domain name.
• all – Upgrades devices across all RF Domains
• containing <WORD> – Filters RF Domains by their names. RF Domains with names containing the sub-string identified by the <WORD> keyword are filtered. Devices on the filtered RF Domains are upgraded.
• filter location <WORD> – Filters devices by their location. All devices with location matching the <WORD> keyword are upgraded.

After specifying the RF Domain and the device type, configure any one of the following actions: force devices to upgrade, or initiate an upgrade through the adopting controller.

• <TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. After a scheduled upgrade, the following actions can be performed.
  • no-reboot – Optional. Disables automatic reboot after a successful upgrade the device must be manually restarted)
  • reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.