Interface Configuration

On the Interface Configuration page, you can add, edit, or delete Interface configurations. The table includes the following parameters:
  • IP Address
  • IPv4 Subnetwork Allocation Name
  • VLAN Name
  • VLAN ID
  • DHCP Relay
  • IPv4 Forwarding
  • Routing Instance
  1. Go to Manage > Devices
  2. Select a device Host Name to see a details panel for that device.
  3. Select the Configure tab.
  4. Under Network Allocation, select Interface Configuration.
  5. Select a port icon on the template graphic to view port details, if available.
  6. Select Add to add, or Edit to edit an Interface.
  7. Enter the interface attributes according to the table below:
    Table 1. Interface Configuration Attributes
    Field Description
    Network Allocation An IP subnetwork configuration.
    VLAN Attribute A VLAN attribute, which can be created from within the Network Policy Switching > VLAN Attribute Section.
    IPv4 Address / Subnet Mask The assigned device IP Address.
    Routing Instance The device routing instance.
    IPv4 Forwarding Toggle ON to enable IPv4 forwarding.
    VLAN Loopback Enable Select the checkbox to enable VLAN loopback.
    DHCP Relay To override DHCP Relay, toggle ON Enable DHCP Relay. If enabled, enter a Primary DHCP Server and an optional Secondary DHCP Server.
  8. To delete Interfaces, select the Interface(s) and select Delete.
9039018-00 Rev AA