Configure Wireless Interfaces for an AP Template

This task provides steps for configuring the Wi-Fi 0, Wi-Fi 1, Wi-Fi 2, and IoT 0 ports on an AP template.

Go to Configure > Common Objects > Policy > AP Template.
Locate a Device Model and select an existing Template, or a default template.
Scroll down to the Wireless Interfaces pane.
Select either the WiFi0, WiFi1, WiFi2, or IoT0 tab.

Note
The IoT0 tab applies only to AP5010/AP5010U models.
Set the Radio Status to On.
Select a Radio Profile—or IoT Profile if applicable—from the drop-down list.
You can also add a new Radio Profile or IoT Profile here, or clone and modify an existing profile.
Select the Radio Usage type.
- Select Client Mode to configure a device for AP client mode radio usage, and to configure advanced features such as Port Forwarding Rules and DHCP Server settings. Choose a Client Mode Profile from the drop-down list. If required, you can configure a new Client Mode Profile or edit an existing profile.
- Select Client Access for normal client operation. Optionally, select Backhaul Mesh Link for wireless portal and mesh backhaul operation.
- Select Sensor for presence operation.
Continue configuring the AP template, or select Save Interface Settings.