Create or modify a switch template.
Use this task to configure PSE settings, which define how ports manage the power that
they supply to devices.
-
Select the add icon.
-
Enter a name.
-
For Power Mode, select 802.3af or
802.3at.
802.3af (PoE) can deliver 15.4 watts over Cat5 cables.
802.3at (PoE+) can deliver up to 30 watts over Cat 5
cables with 25.5 watts available to devices.
-
For Power Limit,
limit the available PoE power to a level lower than the maximum allowed by the
power mode.
-
Select a Priority from the drop-down list:
Low: If the total powered device (PD) power
consumption exceeds the PSE power budget, power output is modified to bring
the total consumption back to within the PSE power budget.
High: When the total PD power consumption exceeds the
PSE power budget, power output is modified only after ports with low
priority PSE profiles are regulated.
Critical: When the total PD power consumption exceeds
the PSE power budget, power output is shut down last.
-
Enter an optional description.
-
Select Save.
