Configure Presence Analytics

Configure a network policy.

Use this task to specify how frequently APs send data to ExtremeCloud IQ. These parameters enable adjustments to accommodate situations where devices are connected over slower links and where the data must be aggregated at different rates.
Note

Note

It is not necessary to change the default values if devices are connected over faster links.
  1. Toggle Enable Presence Analytics On.
  2. Enter a name.
  3. Enter an optional description.
  4. For Trap Interval, set how often the presence sensor reports data to ExtremeCloud IQ.
    Lowering this interval below 15 seconds pushes data faster but also increases network traffic. Raising this interval above 15 seconds pushes data at a slower rate and decreases network traffic.
  5. Set the Aging Time of a given presence profile.
  6. Set the Aggregate Time interval number for the period of time that aggregation will be done for a given presence profile.