Routing

When you select the host name of an AP from the Devices list and then select Monitor > Monitoring > Routing, the following information is displayed (APs only):

• Within the IPv4 Routing Table section, the destination subnetwork, next hop, VLAN Name, VLAN ID, Route Origin, Status, Metric, Route Age, Route Type Priority, and Routing Instance information are all listed. You can filter for the Route Origin and Status. Switch Engine software version 32.6.2.68 or newer is required.
  

  Note

  Up to 100 IPv4 Routes are visible within the table. For additional visibility use an SSH proxy.