To use the supplemental CLI tool, first navigate to Global Settings > VIQ
Management, and enable Supplemental CLI.
Use this task to update CLI commands to multiple devices simultaneously from
ExtremeCloud IQ. You can save Supplemental CLI objects containing CLI commands, and
the commands can then be updated for devices automatically each time you update the
network policy.
-
Go to .
-
Select existing supplemental CLI
objects using the drop-down list next to Re-use Supplemental CLI
Settings.
-
To add a new supplemental CLI
object, select .
To edit an existing CLI object, select the corresponding check box and then
select
.
-
Type a Name.
-
Type an optional Description.
-
Type or paste the CLI commands into the field.
- Enter multiple CLI
commands, one command per line, not exceeding a maximum total of 8192
characters.
- Use CLI Commands that
contain IP and VLAN objects: ${ip:ip_object_name} and ${vlan:vlan_object_name}.
- Perform a complete
configuration update each time commands are appended to device
configurations.
- For Dell EMC switches,
enter the CLI commands,
enable
, and
config
in the beginning of a sequence of CLI
commands.