When you select the host name of an AP from the Devices list and then select
, the system displays the following information (APs only):
- At the top of the main
section, CPU Usage, Memory Usage, MAC Table Utilization, Last Seen time,
Temperature, Power Supply Status, Fan Status, IP Address, MAC Address,
Software Version, Device Model, Serial Number, Make, and IQAgent Version are
all listed.
- The graphic below shows all
of the ports on the device. Selecting a port displays more information.
- Within the VLAN tab are the
VLAN Name, VLAN ID, Active Ports (Enabled port with VLAN assigned), STP
Instance, IGMP Snooping, and DHCP Snooping information columns. Selecting a
VLAN within the VLAN tab highlights the ports that are currently
assigned.
- Within the IPv4
tab are the VLAN Name, VLAN ID, IPv4 Forwarding, Routing Instance, and IP
Address / Subnet information columns. The VLAN can be selected when the row
is highlighted. Ports using the VLAN, both tagged and untagged that are
actively provisioned, light up to indicate ports using the VLAN. Clicking on
a port shows the port name, port status, VLAN untagged/tagged status, and
port actions.
