Configure AP Device Template Advanced Settings

ExtremeCloud IQ can update device firmware and reboot the device during onboarding.

  1. Go to Configure > Common Objects > Policy > AP Template.
  2. Select an existing AP Template, or click to create a new template.
  3. Select the Advanced Settings tab.
  4. For Upload device firmware upon device authentication, turn the setting On to upgrade the device firmware upon onboarding.
    If you have activated device firmware upgrading, select one of two options:
    • Update firmware to the latest version.
    • Upgrade to a specific device firmware version.
  5. To Reboot after uploading, turn the setting On.
    Note

    Note

    Extreme Networks recommends disabling the reboot option when deploying devices in a meshed environment.
  6. To enable Supplemental CLI, turn the setting On.
    For more information, see Configure Supplemental CLI.
  7. Select a Country Code from the menu.
    Note

    Note

    For Legacy World and EU SKU devices, the template country code assignment only takes place when a device is initially onboarded.
  8. Enable Override MGT0 MTU to manually enter a maximum transmission unit (MTU) value, ranging from 100-1500 Bytes. Default value is 1500 Bytes.
  9. Enable POE Profile Override (AP5010 only), select the override option from the dropdown, and hover over the i to view the corresponding override table.

Finish configuring the device template.

9039018-00 Rev AA