Your network hierarchy must contain at least one building before you can
add floors.
Perform
the following steps to add a floor to a building.
-
Go to , and select Add.
Alternatively, double-click the name of a building, or select Add Floor
above the corresponding building map.
-
Select the Floor tab, and
enter a name for the new floor.
-
From the Associated With
menu, select a building.
-
From the Environment menu,
choose the environment type that most closely matches your installation.
-
From the Floor Attenuation
menu, select the noise level of the floor.
-
Enter the installation height
(distance from floor to ceiling) of the APs on the floor.
If the height varies from AP to
AP, enter the average height. This setting has a minimal effect on location
estimates except for sites such as warehouses where the height of ceilings or
high crossbeams is substantial.
-
Enter the dimensions of the
floor plan.
-
Upload a background image of a
floor plan from the drop-down list, or use the drawing tools to draw a floor
plan.
-
To scale the map for imported
images, select the gear icon, and then select Rescale Plan.
-
Enter dimensions, or size the
image manually by moving the red cross hairs to the end points of a known
distance, such as a standard doorway.
-
Enter the known distance and
select Apply.
-
Select SAVE.
