Add a Radio Profile

Use this function to create a new radio profile for 2.4-GHz, 5-GHz or 6-GHz device interfaces. For more information about radio profiles, see About Radio Profiles.

Note

Extreme Networks provides defaults for each item in this section. The following steps are optional, except for the required radio profile Name.

Go to Configure > Common Objects > Policy > Radio Profiles.
Select .
Enter the radio profile Name.
Enter an optional Description, helpful for troubleshooting and identifying specific radio profiles.
Select the desired 802 specification from the Support Radio Modes menu.
To set the optimal maximum power level, enter a value for Maximum Transmit Power.
To set the minimum power level, enter a value for Transmission Power Floor.
To set the maximum value the radio power can drop below the current power level, enter a value for Transmission Power Drop.
To set the maximum number of wireless clients that can use the radio if the AP is permitted to change channels, enter a value for Maximum Number of Clients.
If the number of associated clients is equal to or less than this setting, and if the AP finds a better channel, it can switch to the new channel. Any associated clients will lose their connections and need to reconnect. If the number of clients exceeds this setting, the AP will not switch to the new channel. Whenever a client de-authenticates during the scheduled time range, the AP checks if the number of clients still exceeds this setting. If not, the AP switches channels. If the number of clients exceeds this setting for the entire defined channel switching period, the AP will not change channels.
Select Save Radio Profile.

Now that you have completed the basic configuration, you can modify advanced radio profile settings. Remember to select Save Radio Profile after changing any advanced settings.