Enabling and Disable MAC-Based Network Login

Network Login must be disabled on a port before you can delete a VLAN that contains that port.

To enable MAC-based network login on the switch, use the following commands:

configure netlogin vlan vlan_name

enable netlogin mac

Any combination of types of authentication can be enabled on the same switch. At least one of the authentication types must be specified on the CLI.
To disable MAC-based network login on the switch, use the following command:
disable netlogin mac
To enable MAC-based network login on one or more ports, use the following command:
enable netlogin ports portlist mac
To disable MAC-based network login on one or more ports, use the following command:
disable netlogin ports portlist mac