Relative Route Priorities lists the relative priorities assigned to routes depending on the learned source of the route.
Note
Although these priorities can be changed, do not attempt any manipulation unless you are expertly familiar with the possible consequences.| Route Origin | Priority |
|---|---|
| Direct | 10 |
| BlackHole | 50 |
| Static | 1100 |
| HostMobility | 1150 |
| ICMP | 1200 |
| Auto-peering | 1699 |
| OSPFv3Intra | 2200 |
| OSPFv3Inter | 2300 |
| IS-IS | 2350 |
| IS-IS L1 | 2360 |
| IS-IS L2 | 2370 |
| RIPng | 2400 |
| OSPFv3 ASExt | 3100 |
| OSPFv3 Extern1 | 3200 |
| OSPFv3 Extern2 | 3300 |
| IS-IS L1Ext | 3400 |
| IS-IS L2Ext | 3500 |
| EBGP | 1700 |
| IBGP | 1900 |
To change the relative route priority, use the following command:
configure iproute ipv6 priority [auto-peering | ripng | blackhole | icmp | host-mobility | static | ospfv3-intra | ospfv3-inter | ospfv3-as-external | ospfv3-extern1 | ospfv3-extern2 | isis |isis-leve1-1 | isis-level-2 | isis-level-1-external | isis-level-2-external | ebgp | ibgp] priority {vr vr_name}
Route priority configurable value is between 11-65,534.