Bridge Port Extender General Limitations

In the Extended Edge Switching architecture, Layer-2, Layer-3, multicast, and filtering operations take place on the controlling bridge. The controlling bridge switch and attached BPEs constitute a single, extended switch system. Therefore, the Extended Edge Switching system assumes the scale and limits from the specific controlling bridge model (for example, ExtremeSwitching X670-G2) in use. For applicable limits, see the Limits tables in the ExtremeXOS Release Notes.
Certain ExtremeXOS features are not supported or have limitations. For information, see ExtremeXOS Feature Compatibility with V300 and V400 Virtual Port Extenders.
A maximum of 48 attached BPEs is supported.
A maximum of 4 levels (tiers) of cascaded BPEs is supported.
Note
The V300-8P-2T-W model must be directly attached to the controlling bridge (1 tier only).
A maximum of 4 upstream ports (in a LAG) per BPE is supported (with V400-48).
Stacking cannot be enabled with VPEX enabled.
A maximum of 8 BPEs per ring is supported.
Note
The V300 BPEs do not support ring.
Trusted ports on BPEs cannot be used as user data ports.