Removing Bridge Port Extenders from Slot Assignments

Removing bridge port extenders from slot assignments

You should only perform this procedure if you want to permanently remove the slot and all of its configuration, or if you want to rearrange the same BPEs into different slots.

To disassociate a bridge port extender (BPE) from a slot number assignment:

  1. If the slot module is configured, use the command unconfigure slot slot .
  2. unconfigure vpex ports port_list slot.
    The behavior of this command is similar to removing slots within a chassis. After executing this command, the BPE no longer occupies the slot number assignment.
9036618-00 Rev AA