The following example defines a static load-sharing group that contains ports 9 through 12 on slot 3, ports 7 through 10 on slot 5, and uses port 7 in the slot 5 group as the primary logical port, or LAG Group ID:
enable sharing 5:7 grouping 3:9-3:12, 5:7-5:10
In this example, logical port 5:7 represents physical ports 3:9 through 3:12 and 5:7 through 5:10.
When using load sharing, you should always reference the LAG Group ID of the load-sharing group (port 5:7 in the previous example) when configuring or viewing VLANs. VLANs configured to use other ports in the load-sharing group will have those ports deleted from the VLAN when load sharing becomes enabled.
Address-based load sharing can also span modules.