To create a translation VLAN, do the
following:
- Create the VLAN that will become the translation VLAN.
- Add a tag and ports to the prospective translation VLAN.
- Add member VLANs to the prospective translation VLAN.
A prospective translation VLAN becomes a translation VLAN when the first
member VLAN is added to it.
-
To add a member VLAN to a translation VLAN, use the
following command:
configure
{vlan} vlan_name vlan-translation add member-vlan member_vlan_name {loopback-port port}
-
To delete a member VLAN from a translation VLAN, use the
following command:
configure
{vlan} vlan_name vlan-translation delete member-vlan [member_vlan_name | all]
-
To view the translation VLAN participation status of a
VLAN, use the following command:
show vlan
{virtual-router vr-name}
