ExtremeXOS 22.4 and later allow the IP Forwarding flag to be set for VLAN interfaces with a VXLAN association for IPv4 traffic. This qualifies ExtremeSwitching X670-G2 series switches, which support VXLAN, but do not support routing in-and-out of tunnels (RIOT) (see Routing in and out of Tunnels (RIOT)), nor IP fabric.
For example, aa ExtremeSwitching X670-G2 series switch may use VXLAN over an OSPF-based underlay. It is possible a remote destination network is learned by OSPF on one of its underlay VLAN interfaces that has no VXLAN association. While the CLI allows this setup, this is not a validated design and is therefore not recommended.