This MIB contains objects for the 802.1ag protocol.
The following tables, groups, and variables are supported in this MIB.
| Table/Group | Supported Variables | Comments |
|---|---|---|
| dot1agCfmMdTable | dot1agCfmMdIndex | The index to the Maintenance Domain (MD) table. |
| dot1agCfmMdFormat | Supported as read only. The type (and thereby format) of the MD name. | |
| dot1agCfmMdName | Supported as read only. The MD name. | |
| dot1agCfmMdMdLevel | Supported as read only. The MD Level. | |
| dot1agCfmMdMhfCreation | Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this MD. Supported as read only. Configuration in CLI is not supported. The defMHFdefault (2) value is returned. | |
| dot1agCfmMdMhfIdPermission | Supported as read only. Configuration in CLI is not supported. The sendIdChassisManage (4) value is returned. | |
| dot1agCfmMdMaNextIndex | Value to be used as the index of the Maintenance Association (MA) table entries. | |
| dot1agCfmMdRowStatus | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. | |
| dot1agCfmMdTableNextIndex | dot1agCfmMdTableNextIndex | An unused value for dot1agCfmMdIndex that is used as the MD index for the next newly created domain. |
| dot1agCfmMaNetTable | dot1agCfmMdIndex | MD index. |
| dot1agCfmMaIndex | Index of the MA table. dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. | |
| dot1agCfmMaNetFormat | Supported as read only. The type of the MA name. | |
| dot1agCfmMaNetName | Supported as read only. MA name. | |
| dot1agCfmMaNetCcmInterval | Supported as read only. Transmission interval between CCMs to be used by all MEPs in the MA. | |
| dot1agCfmMaNetRowStatus | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. | |
| dot1agCfmMepTable | dot1agCfmMdIndex | MD Index. |
| dot1agCfmMaIndex | MA Index. | |
| dot1agCfmMepIdentifier | A small integer, unique over a given MA identifying a specific MA end point. | |
| dot1agCfmMepIfIndex | Supported as read only. Interface index of the interface bridge port. | |
| dot1agCfmMepDirection | Supported as read only. The direction in which the MEP faces on the bridge port. | |
| dot1agCfmMepPrimaryVid | Supported as read only. VID of the MEP. | |
| dot1agCfmMepActive | Supported as read only. Administrative state of the MEP. | |
| dot1agCfmMepFngState | Current state of the MEP Fault Notification Generator State Machine. Can have any one of the following values:fngReset (1)fngDefect (2)fngReportDefect (3)fngDefectReported (4)fngDefectClearing (5) | |
| dot1agCfmMepCciEnabled | Supported as read only. If set to true, the MEP will generate CCM. | |
| dot1agCfmMepCcmLtmPriority | Supported as read only. The priority value for CCMs and LTMs transmitted by the MEP. Configuration in CLI is not supported. Default value 0 is returned. | |
| dot1agCfmMepMacAddress | MAC address of the MEP. In Extreme Networks switches, the MAC is returned. | |
| dot1agCfmMepLowPrDef | Supported as read only. An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm. Configuration in CLI is not supported. Default VLAN macRemErrXon is returned. | |
| dot1agCfmMepFngAlarmTime | Supported as read only. The time that defects must be present before a Fault Alarm is issued. Configuration in CLI is not supported. Default value 2.5 seconds is returned. | |
| dot1agCfmMepFngResetTime | Supported as read only. The time that defects must be absent before resetting a Fault Alarm. Configuration in CLI is not supported. Default value 10 seconds is returned. | |
| dot1agCfmMepHighestPrDefect | The highest priority defect that has been present. Possible values are:none (0)defRDICCM (1)defMACstatus (2)defRemoteCCM (3)defErrorCCM (4)defXconCCM (5) | |
| dot1agCfmMepDefects | Error condition to be sent. The conditions can be any one of the following:bDefRDICCM (0)bDefMACstatus (1)bDefRemoteCCM (2)bDefErrorCCM (3)bDefXconCCM (4) | |
| dot1agCfmMepErrorCcmLastFailure | The last-received CCM that triggered a DefErrorCCM fault. | |
| dot1agCfmMepXconCcmLastFailure | The last-received CCM that triggered a DefXconCCM fault. | |
| dot1agCfmMepCcmSequenceErrors | The total number of out-of-sequence CCMs received from all remote MEPs. | |
| dot1agCfmMepCciSentCcms | The total number of Continuity Check messages transmitted. | |
| dot1agCfmMepNextLbmTransId | Next sequence number/transaction identifier to be sent in a Loopback message. | |
| dot1agCfmMepLbrIn | The total number of valid, in-order Loopback Replies received. | |
| dot1agCfmMepLbrInOutOfOrder | The total number of valid, out-of-order Loopback Replies received. | |
| dot1agCfmMepLbrBadMsdu | The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM. | |
| dot1agCfmMepLtmNextSeqNumber | Next transaction identifier/sequence number to be sent in a Linktrace message. | |
| dot1agCfmMepUnexpLtrIn | The total number of unexpected LTRs received. | |
| dot1agCfmMepLbrOut | The total number of Loopback Replies transmitted. | |
| dot1agCfmMepTransmitLbmStatus | Supported as read only. A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. | |
|
dot1agCfmMepTransmitLbmDestMac Address |
Supported as read only. The target MAC address field to be transmitted. | |
| dot1agCfmMepTransmitLbmDestMepId | Supported as read only. To transmit the LBM, destMEPID need not be given. | |
| dot1agCfmMepTransmitLbmDestIsMepId | Supported as read only. This always returns FALSE. | |
| dot1agCfmMepTransmitLbmMessages | Supported as read only. The number of Loopback messages to be transmitted. | |
| dot1agCfmMepTransmitLbmDataTlv | Supported as read only. An arbitrary amount of data to be included in the Data TLV if the Data TLV is selected to be sent. This returns 0. | |
| dot1agCfmMepTransmitLbmVlanPriority | Priority. A three-bit value to be used in the VLAN tag, if present in the transmitted frame. Configuration in CLI is not supported. Default value 0 is returned. | |
| dot1agCfmMepTransmitLbmVlanDropEnable | Not supported. Returns FALSE. | |
| dot1agCfmMepTransmitLbmResultOK | Indicates the result of the operation linked with MEP active state. | |
| dot1agCfmMepTransmitLbmSeqNumber | The Loopback Transaction Identifier of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResultOK is false. | |
| dot1agCfmMepTransmitLtmStatus | Supported as read only. A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. | |
| dot1agCfmMepTransmitLtmFlags | Supported as read only. The flags field for LTMs transmitted by the MEP. Currently, useFDBonly (0) is supported. | |
| dot1agCfmMepTransmitLtmTargetMacAddress | Supported as read only. The target MAC address field to be transmitted. | |
| dot1agCfmMepTransmitLtmTargetMepId | Not supported. To transmit the LTM destMEPID need not be given. Value 0 is returned. | |
| dot1agCfmMepTransmitLtmTargetIsMepId | Not supported. This always returns FALSE. | |
| dot1agCfmMepTransmitLtmTtl | Supported as read only. The LTM TTL field. | |
| dot1agCfmMepTransmitLtmResult | Supported as read only. Indicates the result of the operation. Linked with MEP active state. | |
| dot1agCfmMepTransmitLtmSeqNumber | The LTM transaction identifier. | |
| dot1agCfmMepTransmitLtmEgressIdentifier | Supported as read only. Identifies the MEP Linktrace Initiator that is originating or the Linktrace Responder that is forwarding this LTM. | |
| dot1agCfmMepRowStatus | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. | |
| dot1agCfmMepDbTable | dot1agCfmMdIndex | MD Index. |
| dot1agCfmMaIndex | MA Index. | |
| dot1agCfmMepIdentifier | MA end point identifier. | |
| dot1agCfmMepDbRMepIdentifier | Maintenance association end point identifier of a remote MEP whose information from the MEP database is to be returned. | |
| dot1agCfmMepDbRMepState | The operational state of the remote MEP IFF state machines. The state can be any one of the following:rMepIdle (1)rMepStart (2)rMepFailed (3)rMepOk (4) | |
| dot1agCfmMepDbRMepFailedOkTime | The time (SysUpTime) at which the IFF remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. | |
| dot1agCfmMepDbMacAddress | The MAC address of the remote MEP. | |
| dot1agCfmMepDbRdi | State of the RDI bit in the last received CCM. | |
| dot1agCfmMepDbPortStatusTlv | An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value. The value is one of the following:psNoPortStateTLV (0)psBlocked (1)psUp (2) | |
| dot1agCfmMepDbInterfaceStatusTlv | An enumerated value of the Interface status TLV received in the last CCM from the remote MEP. The value can be one of the following:isNoInterfaceStatusTLV (0)isUp (1)isDown (2)isTesting (3)isUnknown (4)isDormant (5)isNotPresent (6)isLowerLayerDown (7) | |
| dot1agCfmMepDbChassisIdSubtype | networkAddress (5) is returned if senderIDTLV is received. | |
| dot1agCfmMepDbChassisId | The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. | |
| dot1agCfmMepDbManAddressDomain | Not supported. Value zero is returned. | |
| dot1agCfmMepDbManAddress | Not supported. Value zero is returned. | |
| dot1agCfmLtrTable | dot1agCfmMdIndex | MD Index. |
| dot1agCfmMaIndex | MA Index. | |
| dot1agCfmMepIdentifier | MA end point identifier. | |
| dot1agCfmLtrSeqNumber | Transaction identifier/sequence number returned by a previous transmit linktrace message command. | |
| dot1agCfmLtrReceiveOrder | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. | |
| dot1agCfmLtrTtl | TTL field value for a returned LTR. | |
| dot1agCfmLtrForwarded | Indicates if a LTM was forwarded by the responding MP. | |
| dot1agCfmLtrTerminalMep | Not supported. Value FALSE is returned. | |
| dot1agCfmLtrLastEgressIdentifier | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. | |
|
dot1agCfmLtrNextEgressIdentifier |
An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. |
|
| dot1agCfmLtrRelay | Value returned in the Relay Action field. | |
| dot1agCfmLtrChassisIdSubtype | networkAddress (5) is returned if senderIDTLV is received. | |
| dot1agCfmLtrChassisId | The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. | |
| dot1agCfmLtrManAddressDomain | Not supported. Value zero is returned. | |
| dot1agCfmLtrManAddress | Not supported. Value zero is returned. | |
| dot1agCfmLtrIngress | The value returned in the Ingress Action Field of the LTM. | |
| dot1agCfmLtrIngressMac | MAC address returned in the ingress MAC address field. | |
| dot1agCfmLtrIngressPortIdSubtype | interfaceName (5) is returned if present. | |
| dot1agCfmLtrIngressPortId | interfaceName (5), then the octet string identifies a particular instance of the ifName object. If the particular ifName object does not contain any values, another port identifier type should be used. | |
| dot1agCfmLtrEgress | The value returned in the Egress Action Field of the LTM. | |
| dot1agCfmLtrEgressMac | MAC address returned in the egress MAC address field. | |
| dot1agCfmLtrEgressPortIdSubtype | interfaceName (5) is returned if present. | |
| dot1agCfmLtrEgressPortId | interfaceName (5), then the octet string identifies a particular instance of the ifName object. If the particular ifName object does not contain any values, another port identifier type should be used. | |
| dot1agCfmLtrOrganizationSpecificTlv | All organization specific TLVs returned in the LTR. | |
| dot1agCfmStackTable | dot1agCfmStackifIndex | Index object. This object represents the bridge port or aggregated port on which MEPs or MHFs might be configured. |
| dot1agCfmStackVlanIdOrNone | Index object. VLAN ID to which the MP is attached. | |
| dot1agCfmStackMdLevel | Index object. MD Level of the Maintenance Point. | |
| dot1agCfmStackDirection | Index object. Direction in which the MP faces on the bridge port. | |
| dot1agCfmStackMdIndex | The index of the MD in the dot1agCfmMdTable to which the MP is associated. | |
| dot1agCfmStackMaIndex | The index of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable to which the MP is associated. | |
| dot1agCfmStackMepId | If an MEP is configured, the MEP ID. | |
| dot1agCfmStackMacAddress | MAC address of the MP. | |
| dot1agCfmMaMepListTable | dot1agCfmMdIndex | MD Index. |
| dot1agCfmMaIndex | MA Index. | |
| dot1agCfmMaMepListIdentifier | MEP identifier. | |
| dot1agCfmMaMepListRowStatus | ||
|
dot1agCfmFaultAlarm (NOTIFICATION) |
dot1agCfmMepHighestPrDefect |
A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification: dot1agCfmMdIndex—Also the index of the MEPs.MD table entry (dot1agCfmMdTable).dot1agCfmMaIndex—Also an index (with the MD table index) of the MEP's MA network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry.dot1agCfmMepIdentifier—MEP Identifier and final index into the MEP table (dot1agCfmMepTable). |
| extremeCfmMibConformance | ||
| dot1agCfmMaCompTable | Not supported | |
dot1agCfmConfigErrorList Table |
Not supported | |
| dot1agCfmVlanTable | Not supported | |
| dot1agCfmDefaultMdTable | Not supported |