Requirements

Before you install Tunnel Concentrator, make sure that you meet the following requirements:

Licensing and Activation Prerequisites

Complete the following install and license requirements on the Extreme Networks Support Portal:
  • Purchase the Tunnel Concentrator activation SKU EXTR-IQ-TC.
  • Download the Tunnel Concentrator installation image from the portal at Downloads/ExtremeCloud/Extreme Tunnel Concentrator.
For access to the portal, please contact your Extreme Networks Sales Representative.

Universal Compute Platform Prerequisites

Install and connect the hardware appliance. Refer to the Installation Guide that applies to your appliance model:
  • 1130C

  • 2130C

  • 3150C

  • 4120C

Extreme Platform ONE™ Networking or ExtremeCloud™‌ IQ (Classic) Prerequisites

Note the following:

ExtremeCloud IQ Controller Prerequisites

If you choose to deploy ExtremeCloud IQ Controller, note the following:

Reserved IP Ranges

The following table displays the reserved IP addressing ranges for use with Tunnel Concentrator.

Table 1. Reserved IP Ranges
Purpose IP Range Details
Tunnel Concentrator Application Network 10.0.2.0/24 This range is non-configurable. The range forms the attachment point for management access to the Tunnel Concentrator application.
Pod Network The Pod segment that you assigned on the host (the default range is 10.96.0.0/16) This is the segment range for the Pod Network that was assigned on Universal Compute Platform during host cluster creation. Please review cluster configuration on host to confirm.

Firewall Requirements

The following table lists firewall requirements for Tunnel Concentrator.

Table 2. Firewall Requirements for Tunnel Concentrator
Service Protocol Ports
Domain Name System (DNS) UDP 53
Dynamic Host Configuration Protocol (DHCP) UDP 67 and 68
Network Time Protocol (NTP) UDP 123
Cloud Communication (to ExtremeCloud IQ or Extreme Platform ONE Networking) TCP 8090
Tunnel Concentrator communication (HTTPS) TCP 5825 and 443
Generic Routing Encapsulation (GRE)—if IPsec is disabled. GRE N/A
IPsec - Network Address Translation Traversal (NAT-T) UDP 4500
IPsec - Internet Key Exchange (IKE) UDP 500
Secure Shell (SSH) for troubleshooting TCP 22

If you are onboarding Tunnel Concentrator to the cloud, connectivity to the following services is required.

Table 3. Required Connections for Cloud Deployments
Domain Name IP Addresses Protocol Port Description
hac.extremecloudiq.com 34.253.190.192 ~ 34.253.190.255 HTTPS 443 Onboarding to Extreme Platform ONE Networking or ExtremeCloud‌ IQ
<rdc>-inlets.extremecloudiq.com Dynamic IP range TCP 8090 Ongoing connection to Extreme Platform ONE Networking or ExtremeCloud‌ IQ