| Field | Description | |
|---|---|---|
| Enable BLE Service | Select to enable the BLE service for the device. Deselect to disable
BLE Monitoring for the device. Note: BLE Services must be
enabled in the Network Policy before it can be enabled or disabled
on the device. For more information, see Configure the BLE Service.
|
|
| Service Name | The BLE service name. This field is read only. | |
| iBeacon UUID | The iBeacon UUID. This field is read only. | |
| Settings — Major | The iBeacon major value. Value range is 0 to 65535. | |
| Settings — Minor | The iBeaon minor value. Value range is 0 to 65535. | |
| Settings — Power dBM | The iBeacon signal strength. Value range is -128 to 127 dBm. | |
| BLE Scan — iBeacon | Select iBeacon to enable iBeacon Monitoring
for the device. Deselect to disable iBeacon Monitoring for the
device. Note: iBeacon must be activated in the Network Policy
before it can be enabled or disabled on the device. For more
information, see Configure the BLE Service.
|
|
| Enable Cloud Reporting |
Select to enable Cloud Reporting for the device. Deselect to disable Cloud Reporting for the device. To change how often iBeacon transmits to ExtremeCloud IQ, you must update the Network Policy. For more information, see Configure the BLE Service. The default value is 60 seconds. Note: Cloud
Reporting must be enabled in the Network Policy
before it can be enabled or disabled on the device.
|
|
| Enable Batch Reporting |
Select to enable Batch Reporting for the device. Deselect to disable Batch Reporting for the device. To change how often iBeacon transmits batch file reports (default is 10 seconds) and the destination URL, you must update the Network Policy. For more information, see Configure the BLE Service. Note: Batch
Reporting must be enabled in the Network Policy
before it can be enabled or disabled on the device.
|
|
| Generic | ||