Classification Rules

Classification rules associate specific traffic classifications or policy behaviors with the policy role. There are two aspects of classification rule configuration:

The association of a traffic classification with a policy role by assigning the traffic classification to an administrative profile.
The assignment of policy rules that define desired policy behaviors for the specified traffic classification type.

Both the administrative profile and policy rules are associated with the policy role by specifying the admin-pid option, in the case of an administrative profile, or a profile-index value, in the case of the policy rule. Administrative profiles and policy rules are configured using the configure policy rule command.

The administrative profile assigns a traffic classification to a policy role by using the admin-profile option of the configure policy rule command.

Note

Standard policy supports the VLAN (Virtual LAN) tag traffic classification for administrative profiles. All other traffic classifications are enhanced policy in an administrative profile context.

Policy rules are based on traffic classifications. Administrative Policy and Policy Rule Traffic Classifications provides the supported policy rule traffic classification command options and definitions. All other traffic classifications are supported by standard policy.

A detailed discussion of supported traffic classifications is available in the “Traffic Classification Rules” section of the Extreme Management Center Policy Manager online help.

Administrative Policy and Policy Rule Traffic Classifications

Traffic Classification	Description	Attribute ID
macsource	Classifies based on MAC source address.	1
macdest	Classifies based on MAC destination address.	2
ipsourcesocket	Classifies based on source IP address.	12
ipdestsocket	Classifies based on destination IP address.	13
ip6dest	Classifies based on destination IPv6 address.	10
ipttl	Classifies based on TTL.	20
ip frag	Classifies based on IP fragmentation value.	14
udpsourceportip	Classifies based on UDP source port and optional post-fix IP address.	15
udpdestportip	Classifies based on UDP destination port and optional post-fix IP address.	16
tcpsourceportip	Classifies based on TCP source port and optional post-fix IP address.	17
tcpdestportip	Classifies based on TCP destination port and optional post-fix IP address.	18
iptos	Classifies based on Type of Service field in IP packet.	21
ipproto	Classifies based on protocol field in IP packet.	22
ether	Classifies based on type field in Ethernet II packet.	25
port	Classifies based on port-string.	31

A data value is associated with most traffic classifications to identify the specific network element for that classification. For data value and associated mask details, see the “Valid Values for Policy Classification Rules” table in the configure policy rule command discussion of the command reference guide for your platform.

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback