Port Extension Control and Status Protocol

The Port Extension Control and Status Protocol (PE-CSP) is a simple request/response protocol that runs over ECP and is initiated upon detection of a bridge port extender using the LLDP protocol. Each controlling bridge (CB) has a single PE-CSP protocol instance on each cascade port. In the case of a cascade port that is a LAG, the PE-CSP instance runs on the LAG and transmits on the current master port in the LAG. There is a separate PE-CSP session per LAG member port, but configuration commands are sent over a chosen single port in the LAG

Each PE-CSP PDU is made of a command TLV and zero or more additional TLVs.

Example PE-CSP Protocol Exchange shows a typical PE-CSP exchange between a CB and a bridge port extender (BPE).

Click to expand in new window
Example PE-CSP Protocol Exchange
GUID-3860553B-DF16-4611-B8E7-73D4D9C013C2-low.png