Example
The network needs to transport FCoE (Fiber Channel over Ethernet) traffic which is intermixed with other more typical LAN traffic on the same Ethernet network. FCoE needs a lossless transport and PFC can be used to enable this. You define QoS (Quality of Service) profiles for all eight traffic priorities. At the network level, it is decided that FCoE traffic will be assigned to priority 3 (which corresponds to QP4) and the remaining traffic is assigned to one or more other priorities. For this example, it is also assumed that the priority bits in the incoming packets are also 3.
One mechanism that can be used for this classification is the use of Access Control Lists (ACLs) that match on the FCoE ethertypes (0x8906 and 0x8914) using the ethernet-type qualifier with an action of QoS profile QP4 for both rules. Other traffic can be classified to other priorities. Once this configuration is applied, FCoE is now separated from the other Ethernet traffic and is assigned a priority of 3 through the switch.
PFC is enabled at the ports that will see FCoE traffic, in this case, ports 1:1, 2:3, and 6:5.
Since FCoE is assigned to QP4, you would enable the receive PFC for QoS profile to be QP4 and, in this example, would also enable PFC with a transmit priority of 3. The enable commands would then read as follows:
enable flow-control tx-pause priority 3 ports 1:1,2:3,6:5 enable flow-control rx-pause qosprofile qp4 ports 1:1,2:3,6:5
The show port flow-control rx-pause no-refresh CLI command displays the following information. With the no-refresh option the display shows the following information:
X770-32Q-J4-U7.85 # show ports 1,5,9 flow-control rx-pauses no-refresh Flow Control Frames Received Port Pause PFC0 PFC1 PFC2 PFC3 PFC4 PFC5 PFC6 PFC7 Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs ============================================================================== 1 - - - - 1234567 1234567 - 1234567 - 5 - - - - 1234567 1234567 - 1234567 - 16:104 1234567 - - - - - - - - =============================================================================== ">" Name truncated, "-" rx-pause not enabled, "." Counter not available
Without the no-refresh option the display refreshes until interrupted by the console operator pressing Escape:
X770-32Q-J4-U7.85 # show ports 1,5,9 flow-control rx-pauses Flow Control Frame Monitor Sat Aug 18 19:35:12 2012 Port Pause PFC0 PFC1 PFC2 PFC3 PFC4 PFC5 PFC6 PFC7 Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs Rcvs ============================================================================== 1 - - - - 1234567 1234567 - 1234567 - 5 - - - - 1234567 1234567 - 1234567 - 16:104 1234567 - - - - - - - - =============================================================================== ">" Name truncated, "-" rx-pause not enabled, "." Counter not available Spacebar->Toggle screen 0->Clear counters U->Pageup D->Pagedown ESC->exit
The new show port flow-control tx-pause no-refresh CLI command displays the following information. With the no-refresh option the display shows the following information:
X770-32Q-J4-U7.85 # show ports 1,5,9 flow-control tx-pauses no-refresh Flow Control Frames Transmitted Port Pause PFC0 PFC1 PFC2 PFC3 PFC4 PFC5 PFC6 PFC7 Xmts Xmts Xmts Xmts Xmts Xmts Xmts Xmts Xmts ============================================================================== 1 - - - - 1234567 1234567 - 1234567 - 5 - - - - 1234567 1234567 - 1234567 - 16:104 1234567 - - - - - - - - =============================================================================== ">" Name truncated, "-" tx-pause not enabled, "." Counter not available
Without the no-refresh option the display refreshes until interrupted by the console operator pressing the escape key:
X770-32Q-J4-U7.85 # show ports 1,5,9 flow-control tx-pauses Flow Control Frame Monitor Sat Aug 18 19:35:12 2012 Port Pause PFC0 PFC1 PFC2 PFC3 PFC4 PFC5 PFC6 PFC7 Xmts Xmts Xmts Xmts Xmts Xmts Xmts Xmts Xmts ============================================================================== 1 - - - - 1234567 1234567 - 1234567 - 5 - - - - 1234567 1234567 - 1234567 - 16:104 1234567 - - - - - - - - =============================================================================== ">" Name truncated, "-" tx-pause not enabled, "." Counter not available Spacebar->Toggle screen 0->Clear counters U->Pageup D->Pagedown ESC->exit