Adding and Removing Ports from a VLAN

To add ports to a VLAN (Virtual LAN), use the following command:
configure {vlan} [vlan_name | vlan_list] add ports [port_list | all] {tagged tag | untagged} {{stpd} stpd_name} {dot1d | emistp | pvst-plus}}
The system returns the following message if the ports you are adding are already EAPS (Extreme Automatic Protection Switching) primary or EAPS secondary ports:
```
WARNING: Make sure Vlan1 is protected by EAPS, Adding EAPS ring ports to a VLAN could cause a loop in the network.
Do you really want to add these ports? (y/n)
```
The system returns the following message if the ports that you are adding are untagged ports already associated with an untagged VLAN, and you are adding them to a different untagged VLAN or tagged VLAN.
```
Port 1 untagged has been auto-moved from VLAN "Default" to "v2".
```
You can enable direct movement of untagged ports by enabling auto-move globally with the GUID-7F4F5252-63E2-4EEC-BB8A-A03317FC56FB command.
To remove ports from a VLAN, use the following command:
configure {vlan} [vlan_name | vlan_list] delete ports [all | port_list {tagged tag}]

Published March 2020prev | next